Muyang SFSC Series Grinding Machine

This grinding machine is a structure of welded steel plate, the motor and the crusher rotor are installed on the same base, directly driven by an elastic pin coupling; the rotor is calibrated by dynamic balance, it can rotate both co rotation and reversion, so as to prolong the service life of wearing parts. The operation gate is equipped with a safety interlock device to ensure that the motor cannot be started while the operating gate is open. The feeding inlet is located at the top of the crusher and can be matched with different feeding mechanisms. The hammers are arranged symmetrically.

The raw material on the SFSC Series grinding machinery to be crushed (ground) is fed from the feeding inlet at the top by means of a feeding mechanism, which is matched with the machine, and enters the crushing chamber through the feeding guide plate from the left or right, then ground gradually by the beating of the high-speed hammers and the friction of the sieve plates, and discharged from the outlet on the base through sieve apertures by centrifugal force and airflow.

Muyang grinding machines are all in high technologies with full function, and every part on the machine is designed carefully and strictly.

Base: for connecting and supporting each part of the crusher and making them integrated. The crushed material is discharged from the base.

Upper housing: the upper part is completed with a feeding inlet and the lower part is linked with the base. Both sides are equipped with sieve plates, and the crushing chamber is formed by the sieve plates together with the rotor and the raw material is crushed in such chamber.

Rotor: composed of main shafts, hammer carrier plates, pins, hammers and bearings, which are the major moving parts of the crusher. The rotor rotates in high speed, and a dynamic balance calibration shall be conducted after assembling but without pins and hammers.

Operation gate: It is necessary to start the operation gate when replacing sieve plates or hammers. The sieve plates are held down by the operation gate.

Feeding guide mechanism: guide the materials to enter the crushing chamber from the left or right. The feeding guide plate is reversed by control of the cylinder with an electric controlled valve and the motor rotation direction is changed automatically by a limit switch to make it comply with the feeding direction, to ensure a tangential feeding.