Assembly of Rotor on MUZL350T Type Pellet Mill

The lubricating grease shall be filled in rotor of pellet mill and bearing of press roller by the semi-auto greaser at rear end of main shaft, and the oil way shall be kept straightway. A little lubricating grease shall overflow from the seaming of the sealing plate at end of press roller after being filled up in bearing of press roller; a little lubricating grease shall overflow from the clearance between the rotor and main shaft disc after being filled up in bearing of rotor.

You should pay attention to plug up the oil hole in the front end with the sunk screw first when installing the supporting shaft of the press roller. The hole is left when you do the oil pipeline machining, otherwise, the lubricating grease will overflow from this place.

The bearings and oil seal of the rotor are uneasy to be damaged. It is suggested to ask pellet mill experts of Muyang for guide when replacing bearings and oil seal.

Pay attention to abrasion of the cone face of driving rim of the ring die, and the safety operation of the whole pelleting machine will be affected due to mating precision of it and cone surface of ring die. In case the bolt of ring die is broken, generally, the driving rim should be replaced.

The semi-auto greaser must work with grease filter. A certain content of solid impurities is contained in the lubricating grease, and the impurities can be mostly removed by the filter. Regularly clean the filter screen to ensure the filtering effect.