Muyang Grinder Machine

The machine is developed with the method of mixed powder jerring,which is widely applied for the mate ria grnding for the trades of pharmaceutics chemical and foodstuff etc.

The feed machine has a simple structure and is easy to be installed and dismantled and cleaned,with the featu res of stable running,convenient moving low noise and high grinding effi-ciency.etc.

The machine is a high speed running one The target material is smashed by the cutting and rinding of high-speed knives,of which the figure and size of knives can be selected in accordance with different materials and the size of granules can be acqui red by changing of the screen and regulating the soeed.

Four Sizes Produced by Extruder Machine

There are four conditions, under any of which pellets of non-uniform sizes will be produced:

1) Feed mash and water added into the conditioner cannot be evenly mixed with each other because water added into the conditioner is not sufficiently atomized. In this case, the water atomizing nozzle should be checked and cleaned thoroughly to make it free of any blockage.

2) Die holes blocked by large ground particles or foreign matters (usually are accumulated residues), especially when extruding small pellets. Production problems in this case are easy to be identified. The finished pellets usually are uniform at the beginning of production, but this performance cannot sustain for a long time and pellets in large size and small size generated. In this case, it has to stop the feed machine to clean the die holes. In order to avoid die hole blockage, the ground particle size of raw material should not exceed 1/3 of the die hole.

3) Screw is worn out and end of life. This situation can be identified through the clearance between chamber inner wall and screw flight profile. The normal clearance is 1.5mm-2.0mm. When it larger than 5mm, pellets in different sizes are produced. In this case, it is necessary to replace the worn screw with a new one.

4) Feed flow unevenly distributed to discharge at Venture tube because of severe wearing loss of the distributing cone. In this case, the distributing cone should be replaced with a new one.

Muyang Introduced a New Grain Drying Storage System

Recently, Muyang developed and produced grain drying equipments drawing on seasonal characteristics in different regions of the South and the North's grain harvest.

Its use of simulation design and CNC machining tools, set intelligent control technology, variable temperature drying process, Francis and shun reflux, positive and negative, continuous and cyclic drying technologies combine in one, effectively ensure the whole grain drying automated process, low energy consumption, improve the quality of grain drying, to reduce the loss of grain postpartum, energy conservation, technology reached the international advanced level.

Meanwhile, Muyang adopted steel instead of traditional concrete in grain storage silo. Because the silo is clean, and its good sealing can avoid rodents, effectively reducing the proportion of losses during storage of up to 5%.

Currently, Muyang grain drying and storage system have been in the major grain-producing provinces such as Anhui, Jiangsu, Hubei, northeast provinces and other places to establish a demonstration line, after using the system to meet the needs, easy operation, high level of intelligence, low energy consumption, high combustion efficiency of new heat source, and the remaining heat recovery saves energy, food quality and good after drying, become suitable for food production in the status quo of China's low-carbon smart shelf impairment drying and storage equipment.

President Fan of Muyang introduced that grain drying and storage projects as planned popularize annually 2.7 million tons of grain drying; there is no reasonable food store, it will have at least 5% loss, loss of 135,000 tons of grain per year; drying reasonable scientific handling and storage, representing an increase of 135,000 tons of grain annually. 2020, a year due to increased drying and storage devices can be increased 3.78 million tons of grain.

Muyang now has cooprations with a number of economies in the Asia-Pacific international cooperation in grain cultivation, logistics, processing and other aspects of development of agricultural science and technology cooperation, high-tech and export of agricultural products.

Steel Silo Industry Success Stories

Muyang has over 40 years of experience and silo engineering expertise, specializing in material storage technology research and development, design, installation and services, and its products in the domestic occupies about nearly 40% for market share, is by far the most full-scale Asian service providers with most comprehensive single largest storage capacity.

Muyang silo introduces the latest technology and equipment in the world with many customers around the world of design and construction of more than 5,000 spiral steel silos, corrugated steel silo fabricated insulation warehouse project. Muyang spiral steel silo for the introduction of a full set of equipment and technology in Europe, to provide from 50 to 7000 tons of different specifications of the flat for the user, cone bottom, the flow of the material, the material porous materials, such as different forms of steel silos; bellows assembly type steel silo for the United States to introduce the latest manufacturing technology and equipment, with the most advanced computer system that provides users with 10 to 16,800 tons of different specifications of the flat, conical bottom, the flow of the material, the material porous materials, such as different forms of steel silos. Muyang provides customers include and upgrade from technology, civil engineering design, automation and control systems, transportation, cleaning, manufacturing magnetic separation, metering, drying, fumigation, refrigeration, ventilation, dust, temperature, humidity and other measuring equipment, installation, commissioning and training of personnel stop turnkey projects. Muyang fabricated steel silo, spiral steel silo, warehouse and other insulation products are widely used in food, oil, ports, corn deep processing, flour, brewing, chemical, feed, building materials and environmental protection industries in more than twenty provinces, municipalities, autonomous regions and municipalities of more than 1,000 seats built warehousing projects , selling Egypt, Saudi Arabia, Iran , Thailand, India, Japan, the United States, Malaysia, the world's nearly 100 countries and regions, to promote Chinese steel silo industry to the world. Famous customers include Louis Dreyfus, grain storage, COFCO, grain and oil in the sea, 93 Oil Group, DBN Grou , Tangrenshen Group, Yanjing Beer, Snow Beer, Suntory, Tsingtao Beer, Yi Hai, Jiangsu Jianghai, Xiwang Group, chrysanthemum MSG, etc. ; overseas customers such as Taiwan Dacheng, Thailand Chia Tai Group, CJ and so on.